La
Nintendo Switch It is one of the most used consoles today, there is no doubt about that. But at the same time it has been one of the most
failures has submitted in regards to his command. The main buttons inside the remote are the
Joy-con, with which you can move around the entire console menu and play in the best possible way. Due to the constant use that is given to this type of parts,
they tend to spoil easily. Many users have reported cases where
they loosen and within the games everything begins to move without the user pressing anything. Therefore, it is important to learn
how to repair the Nintendo Switch Joy-con.
Is it possible to repair the Joy-con of the Switch?
As they are the most used buttons on this console and that allow a higher level of playability, they are of great importance. By having the
Damaged Joy-Con you will not be able to correctly play any of your Switch games. Luckily yes it is totally possible
repair this type of piece so delicate. One of the best options is to take it to a
official Nintendo support store and let them handle it. It is an even perfect option for all those people who have faults with this piece and still have the
console warranty. However, if you do not have a guarantee, you can evaluate the option of
repair the Joy-con yourself. If you have prior knowledge of this type of issue, nothing stops you from performing the repair on your own.
In most cases, the ideal solution for
repair the Joy-con of this console is
completely change the sitck of the Joy-con, which is precisely the part of the entire console that allows the correct movement of it. This is a relatively easy process to do, as long as you have the
the necessary indications. In addition, you will also need to have a
triwing screwdriver for nintendo. It is a fairly small screwdriver that is capable of
effectively loosening and reattaching all console screws. Since to remove the old sitck and place the new one it is necessary to open the entire device.
Steps to repair the Joy-con of a Nintendo Switch on your own
Once you have
the right screwdriver and the new stick to make the change, you will be totally ready to
quickly and easily repair your Nintendo Switch. Of course, for this, you need to know
how to repair the Nintendo Switch Joy-con with specific steps to follow. Luckily for you, in today's article we will take care of explaining
each and every step necessary to repair your Joy-con. That way you can once again enjoy your free time to play with your Nintendo Switch. In addition, you will already have the knowledge acquired in case this type of failure reappears on your console.
Step 1:
The first action you must take is
open the Joy-con with great care. You cannot separate both plastic parts roughly since there are two
flex cables connected between the load rail and the button panel. This should be unhooked with great care.
Step 2:
The next is
remove internal battery. For this, it is recommended to carefully pull the cable that joins the battery so that it is more easily uncoupled from the place where it is. In case the cables that connect the battery to the lower black piece are disconnected, you will have to reconnect them again and that's it.
Step 3:
To continue with the repairs, you must carefully remove
plastic plate found before the motherboard in question. Since it is very close to the trigger and it has a spring that is what makes it work correctly. In case it falls off, you will have to put it back quickly, since, if you lose this small piece, you will have to buy a new one as well.
Step 4:
After removing the plastic plate you will come face to face with
the Joy-con motherboard. You can open it wide to work with more precision, but be careful with the flex cables that connect both parts. Also, also be careful of
do not disconnect the other flex cable that joins the plastic plate with the motherboard.
Step 5:
In case it is necessary you can
remove the flex cables get in your way or make you feel uncomfortable as you remove the stick to change it for a new one. These cables are simple to reconnect,
you just have to fit them on the nails that work as a connection support for them. So it does not hurt that you withdraw them to
avoid tension or break with any movement during repair.
Step 6:
Once this is done, it will be time to withdraw, with the help of the
special screwdriver previously mentioned, the two screws that hold
the sitck capsule. In addition to also carefully removing the flex cable that is attached to the sitck.
Step 7:
In this step it is recommended
first clean the part where the stick is very well with a brush. That way, when it comes to changing it, it will fit perfectly.
Step 8:
After this everything will be a matter of
remove the sitck and place the new one. From here, you must
perform all the steps we have mentioned, but in reverse. In such a way that you can reconnect everything in the proper way until you close the Joy-con to test it and verify that its operation is correct. In case this has not worked, the best thing you can do, right now, is to resort to a
technical service in which they specialize in Nintendo consoles. In that way
you will leave the Joy-con in the hands of experts for a better result in the repair.